The battery mode is made in a cylindrical form factor and is protected by a thick layer of silicone lining, which prevents moisture and dust from getting inside the device, and also serves as a kind of shock protection. One 18650 format battery is used as a battery; to install it, you will need to unscrew the bottom cover of the battery compartment and install the battery observing the polarity.
The maximum output power of the mod is 100w and directly depends on the resistance of the replaceable evaporator used, since the electronic board works according to the principle of a mechanical mode, but with a set of protection against over discharge of the battery and short circuit. To charge the battery, you need an external charger. The device is controlled through a single Fire button. The button was additionally equipped with an LED to monitor the remaining battery charge. Depending on the charge level, the color changes: 3.66V - violet, 3.48V - blue and below 3.48V - red. The complete clearomizer works on maintenance-free replaceable evaporators, the heating element of which is made in the form of a metal mesh. There is a control system for the tightening force and a convenient top dressing. The drip tip is set to 510,
Battery: 1 * 18650, sold separately;
Payment: own production;
Voltage supplied to the atomiser: 2.8V - 4.0V;
Range of working resistances: from 0.1 Ohm to 3.0 Ohm;
Connector: 510, steel, spring-loaded central contact;
The maximum number of spirals: 1;
Atomizer Resistance: Depends on the installed evaporator;
Volume: 3.5 ml / 5 ml;
Material: plastic, stainless steel;
Dimensions: 27 mm * 137 mm;
Weight: ~ 143 gr;
Mod Trident 100W
Many vapers who use box mods with productive boards designed for use in multiple modes may be skeptical of this device format. Externally, the device looks quite interesting and futuristic - on its side surface there are numerous faces and bulges. The presence of such a form allows the device to sit perfectly in the hand, which is important for many vapers.
Particularly noteworthy is protection against dust, moisture and shock - it is implemented using a stainless steel case, which is coated on top with silica gel. This ensures protection class IP67, which allows you to use the Trident mod battery pack in the most severe conditions. The landing site for the atomiser is large enough, so you can use tanks or drip-stones with a diameter of 25 mm.
Power is provided by a standard 18650 battery, which is installed at the bottom of the mod. In order to prevent moisture and dust from entering the mode, the battery cover is screwed. Management of the device, as well as functionality, is as simple as possible - just one “fire” button, near which there are two LEDs that allow you to control the battery charge level. The voltage supplied to the coil or evaporator depends on the battery charge level and varies between 2.8-4 volts.
Atomiser Trident Sub-Ohm Tank
It is worth paying tribute to the developers of Vandy Vape, who are not only engaged in the development of serviced atomisers, but also “non-services”. An example of this is the Trident Sub-Ohm Tank, which is made in the best traditions of the company. At first glance, it may seem that the Trident Sub-Ohm Tank is quite simple, but it is able to give the vaper a decent taste and bulk.
The atomiser works on replaceable evaporators designed specifically for this tank. Evaporators have a resistance of 0.15 Ohms and a heating element on a grid with small cells, thanks to which there will be no problems with taste and bulk.
Tank filling is quite traditional - top. Moreover, in order to fill the liquid into the tank, you just need to unscrew the top cover (it unscrews half a turn) and into one large enough hole